翻訳と辞書
Words near each other
・ Venediger Group
・ Venedikt Dzhelepov
・ Venedikt Miakotin
・ Venedikt Yerofeyev
・ Venediktos Printesis
・ Venedocia, Ohio
・ Venedy
・ Venedy Township, Washington County, Illinois
・ Venedy, Illinois
・ Venedykt Aleksiychuk
・ Veneen luominen
・ Veneer
・ Veneer (album)
・ Veneer (dentistry)
・ Veneer (EP)
Veneer hammer
・ Veneer Magazine
・ Veneer saw
・ Veneer theory
・ Veneeta Dayal
・ Venefica
・ Venefica (band)
・ Venefica multiporosa
・ Venefica ocella
・ Venefica procera
・ Venefica sorceress
・ Venefica tentaculata
・ Veneficoceras
・ Venegas
・ Venegasia


Dictionary Lists
翻訳と辞書 辞書検索 [ 開発暫定版 ]
スポンサード リンク

Veneer hammer : ウィキペディア英語版
Veneer hammer

A veneer hammer is a woodworking tool used in applying veneer.
==Description and use==
A veneer hammer is used in conjunction with hot hide glue in applying veneer to a substrate. The term "veneer hammer" is somewhat misleading, as the "hammer" is used more like a squeegee than a hammer. The hot hide glue is applied to the substrate, then the veneer is laid onto the glued surface. The hammer itself has a dull blade, approximately three inches wide, on one side of the head, and a square shaped face on the other side. This head is connected to a standard handle, much like a regular hammer. The small square face is designed to push down on, exerting force to the blade side of the head.
The veneer is pushed into the glue with the wide blade, and the hammer is pushed or pulled, forcing out the excess hide glue. The sheer bulk of the metal head helps to cool the glue, causing it to grab and hold the veneer in place. The glue cures as it cools. The procedure is to work from the center, out towards the edges, forcing the hot excess glue out from under the veneer.
Often workers will apply the glue to the face of the veneer as well, using it as a lubricant for the hammer. By applying glue, therefore moisture, on both side of the veneer, the worker also avoid the curling of the veneer. This surface glue can be easily removed, using a cabinet scraper or cold water.
In areas where a good bond is not achieved, the glue can be reheated with a common household iron, and reactivated. The veneer can be forced into the reactivated glue using the veneer hammer, and the area where the bond was poor, will become properly adhered to the substrate.
Workers often make their own veneer hammer, often having a wider "blade" than the commercially available ones. The blade can be made from metal or wood. The important factor is that the shape of the blade be somewhat tapered, permitting the required force to be applied directly under the blade.
The process is centuries old, possibly dating back to Egyptian times, as examples of veneered work have survived from that era.

抄文引用元・出典: フリー百科事典『 ウィキペディア(Wikipedia)
ウィキペディアで「Veneer hammer」の詳細全文を読む



スポンサード リンク
翻訳と辞書 : 翻訳のためのインターネットリソース

Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.